@Rotaru Dragos, I have moved the thread to the right place.
a) You may also need to enable
ACPI in the
BIOS settings - if it is already enabled, you may try disabling it and test.
b) Boot into Setup (
Bios) go to Advanced, Hard Drive Mode,
SATA. If it is set to
AHCI, change it to
IDE or
Legacy. But it also appears as
AHCI <Enabled> pass it to <
Disable>.
SATA drivers may be missing in the builds you have tried.
c) update BIOS
d) If the above options do not help, you may have faulty hardware. You may try running
hardware diagnostics and checking your
RAM. Check with your manufacturer for hardware diagnostic programs.
NOTE: Try the options
one by one, but the
a) go to
b) and so on.