- Downloaded
- 9.5 GB
- Uploaded
- 100.6 GB
- Ratio
- 10.64
- Seedbonus
- 6,681
- Upload Count
- 9 (8)
Member for 5 years
It works in the background and constantly analyzes the situation. In case of mistakes or exceeding threshold defined parameters specified by the user, a warning. In most cases, it comes to the aid SMART technology, since it is one of the fastest and easiest ways to track changes in critical or critical parameters of the drives.
Since the size of hard drives constantly increasing, data stored on them, all the more valuable to the user computer (especially for a company or office). In this case, you may cause serious problems after hard disk failure. Hard Disk Manager can monitor hard disk status, including temperature and SMART (Self-technology, analysis and reporting, built in most hard disks today) for each disk. The program also measures the data transfer rate from the hard disk in real time, which can be used as a benchmark or to detect possible hard drive failure, deterioration of its performance.
Hard Disk Sentinel can be used to prevent serious damage or data loss. The program warns the user if a problem before it happens and give you the opportunity to backup important and valuable data. Hard Disk Sentinel runs in the background and constantly analyzes the state of the hard drive. If there is an error or unexpectedly observed behavior, the program warns the user about the current status. Usually, the hard disk condition may slowly deteriorate from day to day. SMART-technology helps to predict possible failure by controlling the critical values of the disk. The program also displays the current temperature of the hard disk and stores the previous temperature that can be used to test the maximum temperature at high loading of the hard disk.
- Works with drives through interfaces IDE, Serial ATA and SCSI, determines the status and temperature in real time; readings are displayed instantly, no need to carry out long-diagnosis; displays the current temperature and the minimum drive-specific attributes according to the manufacturer; advanced users to useful values of operating hours and the number of read / write errors; interprets the status and performance values SMART in percentage for easier understanding;
- With the help of special icons on the disks in the system displays the basic values of the state and used space, thus simplifies control;
- using special icons on the disks in the system displays the basic values of the state and used space, thus simplifies control;
- possible to output the current temperature values in the system tray and follow warning, in case of exceeding of threshold values; if you wish, you can view detailed status information of all hard drives in a window or small window and a full schedule of temperature change since the start of the program;
- Identifies the model drives and displays detailed information about each of them, from the revision number / size of the buffer and ending with all its other properties; Displays the current and maximum possible data transfer mode;
- The program counts the total amount of data that has been copied or written to disk, displays the current read / write speed and the CPU;
- Displays information on all sections of the system, regardless of the number of drives; hereinafter these data are used for automatic warning and status display.
Hard Disk Sentinel Pro beta version 5.60.1:
- fixed possible BSOD when Intel SSDPEDMW400G4 SSD used with Intel 17.8 Intel RST driver
- fixed possible increase of "Number of error information log entries" count on Samsung NVMe SSDs
- added further protection against problem in Intel AHCI driver 11.0, 11.2
- added support for GEIL ZENITH SSDs
- improved support of LEXAR SATA SSDs, PLEXTOR SSDs, Sandisk X300 SSD
- detect eMMC information on additional eMMC devices
- non-English language file updates
- fixed possible BSOD when Intel SSDPEDMW400G4 SSD used with Intel 17.8 Intel RST driver
- fixed possible increase of "Number of error information log entries" count on Samsung NVMe SSDs
- added further protection against problem in Intel AHCI driver 11.0, 11.2
- added support for GEIL ZENITH SSDs
- improved support of LEXAR SATA SSDs, PLEXTOR SSDs, Sandisk X300 SSD
- detect eMMC information on additional eMMC devices
- non-English language file updates
- Download & Install, Extract With
You must be registered for see linksdownload formYou must be registered for see links
- Run the Application
- Use Key From "Medicines" To Register
- Enjoy!
| Supported OS | Microsoft Windows 10, 8.1, 8, 7, Vista, XP SP3 |
| RAM | 256 MB or above |
| Processor | Windows fully compatible PC with Intel Pentium 4 / AMD Athlon 64 processor |
| Free disk space | 30 MB |
| Screen Resolution | Optimally standard screen resolution no less than 800 x 600 pixels |
You must be registered for see links
Medicines
You must be registered for see links
setup
You must be registered for see links
Last edited:
